• Same as DSP 4to6, but with digital input/output
  • The Digital Signal Processor with 4 inputs and 6 outputs.
  • Digital inputs optical and coaxial SP-Dif
  • SP-Dif output (optical) with volume-regulated signal from channel 1+2.
  • Note: with the digital master/slave possibility you can create a 12, 16, 24, 32 channel DSP! (Digital out and then digital in)
  • Highest resolution, e.g. time delay in 0,02 msec/step, Q in steps of 0.001
  • Parametric and Graphic EQ with up to 30 (para-graphical) bands per channel pair
  • All settings in real-time
  • USB and BT adapter (MOS-BTM), for adjusting by PC and Android smart phone apps
  • Low-level or High-level input with auto-sense (only by High-Level)
  • Aux input with auto-sense for stereo signal
  • Hands-free and mobile navigation
  • 4 presets
  • Mixer matrix to realize all possible mixtures and couple input and output channels as desired
  • Intuitive User Interface and video tutorials to avoid an instruction book.
  • Operating also without mouse, only with keys for an easy adjusting in the car
  • DSP Technology made by cooperation MOSCONI-GLADEN
  • Designed and made by MOSCONI, Italy



Input Mode:Low Level {LL} / High Level {HL}
Input Impedance:> 10Kohm (LL) / 47ohm (HL)
Input Sensitivity:2Vrms ÷ 8Vrms (LL / 5Vrms ÷ 20Vrms (HL)
Input Voltage Regulation:-12dB ÷ 0dB
Max Output Signal:4Vrms
Output Impedance:50 ohm
T.H.D. Distortion:
Frequency Response:20Hz ÷ 20KHz (within -0.1dB)
Channel Separation:>75dB (@ 1KHz)
Supply Voltage:11V ÷ 15V
Current Consumption:0.5A @ 12V
Ground Isolation vs Car Body:1Kohm
Autosense:Two operative modes (yes, High Level mode only)
Remote Output:130mA max
Communication Peripherals:On-board USB, Bluetooth socket, Remote controller connector for optional display-control unit
Dimensions:150 x 125 x 40 mm (including fixing feet)