DSP 6TO8 V8 (Archived)

maindsp

FEATURES:

  • 6 Channels In, 8 Channels Out
  • Channel Delay with steps of .02ms (1/4 inch)
  • All settings are in Real Time
  • External control with display presets
  • USB + Bluetooth input to make adjustments via PC and APPs for Android Smart Phones and Tablets
  • Low or High Level Input
  • SP-DIF Digital Input Card Optical or Coax
  • 4 Presets
  • Completely manufactured in Italy

 

SPECIFICATIONS:

Input Mode:Low Level {LL} / High Level {HL}
Input Imedance:> 10Kohm [Typ 14.3Kohm] (LL) / 37ohm (HL)
Input Sensitivity:2Vrms ÷ 8Vrms (LL / 5Vrms ÷ 20Vrms (HL) – viaon-board potentiometers
Input Voltage Regulation:-12dB ÷ 0dB – via on-board potentiometers
Max Output Signal:4Vrms
Output Imedance:50 ohm
S/N Ratio:>102dB “A” (typ. 105dB “A”)
T.H.D. Distortion:<-0.003% @ 1Vrms
Frequency Response:20Hz ÷ 20KHz (within -0.1dB)
Channel Separation:>91dB (@ 100Hz)
>91dB (@ 1KHz)
>72dB (@ 10KHz)
Supply Voltage:11V ÷ 15V
Current Consumption:0.5A @ 12V
DC-DC Converter:Transformer coupled, Voltage regulated, Current-Mode, Flyback converter
Conversion Frequency:105KHz
Ground Isolation vs Car Body:1Kohm (default) / Isolated (optional) / Grounded (optional)
Autosense:Two operative modes (yes, High Level mode only)
Remote Output:130mA max
Communication Peripherals:On-board USB, Bluetooth socket, Remote controller connector for optional display-control unit
Expansion Slot:External Memory (EEprom)
Optical Board:Optional

Save

Save

Save