SPECIFICATIONS:
| Stereo Power RMS @ 4 Ohm | 1 x 280W |
| Stereo Power RMS @ 2 Ohm | 1 x 450W |
| Bridge Power RMS @ 4 Ohm | 1 x 600W |
| Signal to Noise Ratio | > 90dB |
| Low Pass Crossover | 35Hz ~ 300Hz |
| High Pass Crossover | 10Hz ~ 60Hz |
| Bass Boos @ 45Hz | 0 ~ 18dB |
| Frequency Response | 10Hz ~ 350KHz (+/- 1dB) |
| T.H.D. @ 4 Ohm | < 0.1% |
| Efficiency @ 4 Ohm | 82% |
| Fuse Rating | 30A x 2 |
| Input Sensitivity | 200mV ~ 6V (+/- 5%) |
| Dimensions | 224 (W) x 50 (H) x 280 (L) mm |
FEATURES:
- Digital class-D mono block amplifier
- MOSFET PWM power supply
- Stable into 1 ohm mono load
- 24dB/octave variable crossover
- Variable Subsonic Filter
- Variable Bass Boost or Gain Attenuator
- Variable Low Pass Filter
- Variable Phase Shift
- Input Sensitivity: variable 200 mV maximum to 8 V minimum
- Multi-Way Protection Circuitry: overhead, over current, short circuitry and speaker DC protection
- RCA line input and output
- High efficiency of 86%
- Tested voltage & THD: 14.4V & less than 0.05% THD
- Operating voltage: DC10V~16V power input
- Wired Remote Controller RTC (optional)